Glare Sewing Machine All Purpose lubrication Oil -5 ltr
₹ 1,595.00 (-3%)
Product Code : GLRLLTR
Product Condition : NEW
Country Origin : INDIA
GLARE ALL PURPOSE LUBRICANT OIL
JOINTS & HINGS
Pure & Clean sewing machine oil
Oiling any & all metal parts
Spout reaches any area
Keeps sewing machines working smoothly
Adds many years of life to the machine
High lubricating qualities
Pure, non-flowing compound
Glare Machine Oil is used to lubricate sewing machines where metal parts come in contact with one another preventing excessive wear. It also aids in the protection against rust and damage
Preparing to Oil the Machine
Some manufacturers recommend cleaning the machine after every 10 hours you use it. Clean it when you see lint starting to gather. Some older machines mark the spots where you should drop oil in red
If you don’t have a copy of the instructional manual, you should be able to get one on the manufacturer’s website. You might even be able to download it. If that doesn’t work, call the manufacturer and ask for one. You will be asked the machine name, model, and serial number most likely. You could also ask a local dealer
Some machines do not need to be oiled. They are self-lubricating. Such a machine will still need to be maintained, but if it says not to oil it at home, don’t.
Go slowly. You want to make sure that you don’t use too much oil. It’s a good idea to use a little bit of oil, and see how it works. Then use more. Place a piece of newspaper under the machine while you work.
Oil small areas at a time. You should take apart small areas of the machine piece-by-piece to oil them. Study the instructional manual drawings first so that you understand the function and name of each part.
Disassemble the parts following the instructions in your manual. You will want to follow a process of cleaning the piece, brushing it out, and then lubricating each area.
After you finish with each area of the sewing machine, you will want to put it back together, and then move on to the next part. Replace needles frequently. You will probably want to do this with each new project.
Remove all of the extra pieces of the machine that will get in the way of a thorough cleaning. For example, remove thread, bobbin cases, plates, and the presser foot.
Remove the stitch plate. If your machine has a bobbin hook, you should remove it because lint could be collected there. Remove the machine’s needle for safety purposes.
Take a small, stiff lint brush. You should be able to brush away the lint with the stiff lint brush. Brush away the lint that you can. Sometimes these small lint brushes and other cleaning materials will come with the sewing machine.
To reach pieces of lint that are hard to sweep away because they are compacted, try using tweezers to remove them. It’s essential that you thoroughly clean your machine before you apply the oil.
Try using a soft cloth to wipe away any lint or residue on the bobbin hook. Some people also use clean mascara brushes or pipe cleaners for this process.
Oiling the Machine
You cannot use car oil. You need to buy oil that is specifically for sewing machines. Sewing machine oil is clear and comes in a small bottle.
Your sewing machine may have come with a bottle of oil when you purchased it from the dealer or store.
You can find this oil in sewing and fabric shops. This cannot be said enough. You cannot use any other oil than the oil recommended in your owner’s manual.
Household oil or WD-40 will not work. Sewing machine oil is of different consistency than oil you’d put in a car. It’s clear and lighter like GLARE OIL
You should only need a small amount of oil. Your owner’s manual will tell you where to drop it in the machine. It only takes a couple of drops.
Generally, you will be told to squeeze a few drops of oil on the housing unit that the bobbin case sits in.
Most machines want you to oil the shuttle hook (which is the thing that spins inside the bobbin casing). Often you will be told to drop oil inside the hook race and the housing of the sewing machine. That’s the silver ring that the bobbin hook fits into. Your machine will perform better and be quieter if you drop oil here because the two pieces rub together.
You may also be instructed to put a drop of oil on the outer ring of the bobbin hook. This is where it slides along the hook race.
You could leave a piece of fabric under the presser foot to soak up any excess oil. You don’t want oil to stain your next project when you start stitching.
Take a cloth, and wipe away excess oil. Otherwise, it could end up on your fabric and thread. Put your parts back together. Avoid oiling plastic parts.
If you use too much oil, you can run muslin through the machine, and then wipe the exterior of the machine. Use a damp, soapy towel. Let it sit. That way the oil will collect. Then, do it again. You might need to do this a few times over the subsequent days until all of the extra oil is not in the machine.
Test the machine. Before you start sewing a new project, make a few stitches on a piece of fabric you don’t care about. You want to see if any excess oil remains. Screw the needle plate back into the sewing machine.
Remove the needle plate. Turn the handwheel towards yourself until the needle is fully raised and open the hinged front cover. Unscrew the needle plate screws. A screw driver will come with the machine.
Clean the feed dog. Remove the bobbin. Use the brush supplied to clean the area. Remove the bobbin case. Snap the two hook retaining arms outwards. Remove the hook cover and the hook. Clean with a soft cloth.
Lubricate the points in the instructional manual with 1-2 drops of sewing machine oil. Turn the hand wheel until the hook race is in the left position. Replace the hook. Replace the hook cover, and snap back the hook retaining arms. Insert the bobbin case and bobbin and replace the stitch plate…
NON STAINING OIL WITH RUST INHIBITOR